Locksmith Tips and Tricks | Locksmith Blog

Broken Multipoint Locks

Locksmith Tips and Tricks

Back by popular demand once again is five locksmiths tips and tricks.

I have had loads of emails asking when the next locksmith tricks would be added.

So Here you are, Five random tricks that may (or may not) help you out one day.




1> GU Mechanism Failure

The older GU mechanisms are prone to a failure by where the cast gear explodes out the back of the gearbox. (As in the gold mech in the image). If the door is jammed shut all that is required to open it is to apply a reasonable force downwards on the handle. Remember to physically unlock with key first though. A good locksmith will always have  a GU on the van, it is one of the most common out there!

2> Cutting Inner Steel Frames

When fitting a different multipoint lock that requires new keeps to be cut you will sometimes encounter an internal metal frame inside that is going to foul the hooks or shoot bolts and prevent the mech locking. I have found the best way to cut this metalwork is to hammer the edge of it with a sharp screwdriver or old chisel, splitting it. Do this at the top and bottom section of the area you need to remove and then fold inwards using a similar technique.

3> Adjusting Flag Hinges

Remove any cover caps and mark around the hinges with a pencil.
Starting with the top hinge wind each a few turns one at a time to pull the top of the door inwards and sometimes the bottom hinge outwards slightly. You will see the direction of the movement using the pencil lines as a guide. Test after each adjustment and fine tune to improve lock meshing.
If in doubt return all hinges back to pencil marks and try again.

4> Locksmith Training

Want to further your locksmith knowledge or learn how to pick locks like an expert?
There's only one man for the job. Jay at Island locks - Locksmith Training

5> Guest Posting Online

Guest posting is now an important part of how we should be advertising as locksmiths. A lot of my customers find me through investigating a problem themselves online and then reading a post I have made about it. Of course all your contact details are in the article and when recognised as an expert I get a call asking me to go and attend and help.
I recently travelled across the country to unlock some Cyberlocks for a company that had read an article of mine online. It was a good earner and well worth the trip!

Rick.

Thanks to Rob at Arvco Locksmiths at for some of that valuable content.

Five Locksmith Tricks & Tips | Locksmith Blog

Working as a self employed locksmith brings new challenges every day.

Seldom are two jobs the same and there are always head scratching moments when encountering a new lock problem.

Most of a locksmith's knowledge is gained through solving these problems and discovering new techniques to make life easier next time around.

Here are five random tips & tricks I have discovered over the years that may be of benefit to you and your locksmith business:

1/ Drilling into a lever pack

When drilling a lock case lever pack side, you can prevent the tip of the drill burring up the levers by using a flat tipped drill bit for the final penetration. Bending or damaging that front lever can cause a world of pain so a quick swap of the drill bits is well worth practicing!

2/ Planning ahead

Before setting out on your lockout job, quickly log into Google Maps and find the address then take a closer look at the door. This helps in recognising the property which may be harder to spot on a dark night but also lets you take a good guess at the types of lock to expect. Its surprising how many customers describe something completely different on the phone.

3/ Check all doors and windows

When attending a lock out you should weigh up all your options before commencing work, particularly destructive openings. Occasionally there are other doors and windows already unlocked that are overlooked by the panicking customer and the majority of the time the alternative doors have weaker security or keys still inside the lock. Why fight against the heavily secured main door?

4/ Mortice keys that just spin 360 degrees

A common problem with lever deadlocks is the curtain or bolt tail breaking off through excessive force and the main symptom would be a key spinning all the way without unlocking the door. Since you have the key to hand you can insert and turn to 180 degrees to align the levers with the bolt stump. Access the bolt with a tidy hole or through the door-frame gap to manually inch the bolt open.

5/ Millenco uPVC mechanisms (submitted by Locksmith Walsall)

When changing a cylinder on a Millenco mechanism in a upvc door, always remember to use the smaller retaining screw and never the new one supplied with the cylinder. A screw that is too long will enter too far into the lock case and prevent parts from moving, worst case scenario results in a bent mechanism! A costly mistake that you don't want to make.

Five completely random tips for locksmiths. I hope to share some more in the future.

Mike: Huddersfield Locksmiths